Cranks and BB`s

Quality and high value

Cranks and BB`s There are 11 products.

Showing 1 - 11 of 11 items
  • Spider to install the 104 bcd chainrings on our cranks (or any other with the SRAM Directmount). Available in 1 or 2 ring versions, with a offset of 0 mm and 6 mm.Material: Aluminum 7075 T6 Weight 30-35 gr For 1 or 2 rings Offset 0 mm and 6 mm

    $22.55
    In Stock
  • A set of consumables for Neutrino components bottom brackets. Due to the low accuracy of the size of the rings, we put in the set of rings for seals of two sizes. Should choose the right. The BSA30 kit contains:6806RS stainless steel bearings 2 pcs Rubber rings GOST 039-042-19-2-2 2 pieces Rubber rings GOST 040-043-19-2-2 2 pieces Rubber...

    $12.03
    In stock
  • Tool set for Neutrino components bottom brackets service. Material: aluminium 7075 Т6

    $7.52
    In stock
  • Threaded BB for cranksets with 24 mm axle. Reliable labyrinth seal filled with super-water resistant grease, high-quality stainless bearings, replaceable bearings. Because of the tight seal, the BB rotates tightly, but the loss of power due seal friction is no more than 1 W at 60 rpm, this is not noticeable to the legs.Weight...

    $30.06
    In Stock
  • Threaded bottom bracket for cranksets with a shaft of 30 mm. Reliable labyrinth seal filled with marine grease, high quality stainless bearings, the possibility of independent bearing replacement. To install this BB, you need a special wrench - diameter 49 mm, 12 hooks. Do not fit the wrenches for the BB Shimano, Rotor,...

    $30.06
    In Stock
  • Ultra light threaded bottom bracket for cranksets with a shaft of 30 mm. Reliable labyrinth seal filled with marine grease, the possibility of independent bearing replacement.Weight 40 g Cups material: aluminium 7075 Т6 Bearings 6706RS labyrinth seal The possibility of independent bearing replacement. For Shimano Hollostech II...

    $30.06
    Add to cart
    Out of stock
  • Axle for Neutrino Components Solid and Solid Light cranks, it must be purchased together with crank arms. You can also purchase an axle separately to install our cranks on a frame with a different standard of the bottom bracket. Please write in the note to the order your standard of the bottom bracket so that we send you the necessary spacers....

    $27.06
    In stock
  • Very strong cranks for any use. Strong enough for downhill and light enough for cross-country. Narrow Q-factor - good for knees. Modular design allows you to pick up the axle for your frame and use the right chainring - directmount of any size or 104 bcd using a spider. In a set with cranks you need to buy an axle...

    $120.24
    In Stock
  • Very light cranks. Narrow Q-factor - good for knees. Modular design allows you to pick up the axle for your frame and use the right chainring - directmount of any size or 104 bcd using a spider. We do not recommend these cranks to riders heavier than 80 kg and 70 kg for sports use. You will not break it, but the...

    $120.24
    In Stock
  • The head wrench for bottom brackets with a diameter of 49 mm with 12 hooks. Suitable for our BSA30 BB`s.Material: aluminium 7075 T6 Slot for torque wrench 3/8 "

    $9.02
    In stock
  • The key of the self-extracting nut for our cranks. Most likely you will never need it, but if you want to clean, lubricate or replace the fixing screw, you can purchase the key separately.

    $3.01
    In stock
Showing 1 - 11 of 11 items