No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Perfection consists of small things
Small parts There are 21 products.
Bash guard 104bcd
Bash guard is intended to protect the chainring from the blows. It sets in place of large chainring. "Half" design provides a light weight. Usually, when passing obstacles always always ahead the same leg, so protection needs only one half of a chainring. For complete protection, you can install two bash guards. To install with 9 sp Neutrino...
600 рубProduct available with different optionsBash guard base
It is necessary to additionally put in the basket a plastic bash guard. This product is only an aluminum base with. You can select the required mounting standard and the size of the bash guard separately. Light, but very durable bash guard of polycarbonate with ISG05 mount perfectly absorbs and dampens shocks.Bash guard...
2 300 рубIn stockChain guide
A chain guide with ISG05, ISCG Old or BSA mount. Low weight, solid polycarbonate frame, rigid base.For use with Narrow Wide chainrings Upper frame material: polycarbonate Base material: aluminum 7075 Т6 4 mm For chainrings from 26t up to 36t Compatible with oval chainrings. Weight 37 gramms with screws...
1 700 рубIn stockChain guide with bash guard
It is necessary to additionally put in the basket a plastic bash guard. This product is only an aluminum base with a frame. You can select the required mounting standard and the size of the bash guard separately. A chain guide with a bash guard with ISG05 mount. Light, but very durable bash guard of polycarbonate...
2 900 рубIn stockChainring bolts 4 pcs
High-quality aluminum ring bolts. Deep hexagon slot, tight thread. Types:4mm length for use with single chainring 7 mm for the double, or chainring and bash guard. For Neutrino components 104 bcd 9 sp chainrings need to use 7mm length ring bolts. Screws 7 mm - only screw parts, without nuts. For use with shainrings with intergated thread....
1 200 рубOut of stockChainring shims
Shaims to reduce chain line. First of all for double chainring cranksets, but it is useful for conventional cranksets. By reducing the chain skew increases the service life of the chainring and the biggest cogs. If a chainring you have more wear on the outside than from the inside, then these washers will be helpful.Thikness 3 mm For 104 bcd, 96 bcd...
250 рубOut of stockCleat screws
If your old screws hex slot damaged, you can purchase them separately.High-strength screws, grade 10.9 Size М5х10 mm Set of 4 pieces
50 рубOut of stockCleats for Crank Brothers pedals
A copy of the Crank Brothers Premium cleats for pedals all models. Functionality as the original, resource is not worse than the original.Material: most durable bronze ... well, almost 2 options of release angle: 15 or 20 degrees It includes only the cleats, without plates and gaskets Screws are available to order separately When installing the...
900 рубOut of stockCrystal seat clamp
Seatpost clamp. Looks great and performs perfectly.The acceptable seat tube diameter is +/- 0.5 mm from the nominal clamp diameter. For example, a 34.9 mm clamp will fit 34.4 to 35.4 mm tubes. Clamp depth: 13.5 mm Maximum tightening torque: 6 N m Stainless steel fasteners Color:at choise Material: 7075T6 aluminum Weight: 23 g for 36.4 mmThe...
3 500 рубIn stockDM stem spacer
To install our crank set, you need a 12 mm allen key. If you do not have one, you can purchase this one.
900 рубIn stockHeadset cap
Light headset cap with picture to choose from. Is possible to apply your image or text, logo, club symbols, etc., please contact us to discuss. Please specify the desired image фтв color in the note to the order on the shopping cart page.Weight 6.6 gramms Made of 7075 Т6 aluminum Screw not included
700 рубIn stockPlastic Bash guard
Bash-gard for installation on our base with mounting ISCG 05, ISCG Old or with mounting on threaded BB.This product must be purchased together with the base. You can also purchase a Bash Guard in addition.Material: polyamide with glass fiber
600 рубIn stockShimano Directmount chainring tool
Tool for Shimano directmount chainring. Analog of Shimano TL-FC41 tool.Material: aluminium 7075 Т6
900 рубIn stockSolid seat clamp
Seatpost clamp. Looks great and performs perfectly.The acceptable seat tube diameter is +/- 0.5 mm from the nominal clamp diameter. For example, a 34.9 mm clamp will fit 34.4 to 35.4 mm tubes. Clamp depth: 13.5 mm Maximum tightening torque: 6 N m Stainless steel fasteners Color:at choise Material: 7075T6 aluminum Weight: 23 g for 36.4 mmThe...
2 500 рубIn stock
